文章8 分钟阅读 热门

安装 sudo apt-get install dante-server 安装完后可使用 danted -v 查看版本信息 创建日志,可忽略 touch /var/log/socks5.log

aadmin内容来源
0 评论71.7k 阅读

安装

sudo apt-get install dante-server

安装完后可使用 danted -v 查看版本信息


创建日志,可忽略

touch /var/log/socks5.log


创建用户,如果无需用户密码连接可忽略

sudo useradd -s /sbin/nologin test -g proxy

passwd test


danted.conf 配置文件常用参数

#  指定日志文件保存的绝对路径

logoutput:/var/log/socks5


#  绑定网卡跟端口

internal: 0.0.0.0 port=1080     #  进口 IP 或 网卡

external: eth0 port=1080        #  出口 IP 或 网卡


#  设置 socks 身份验证方式

socksmethod: username   #  如为 none 则表示不进行身份验证(rfc931)

socksmethod: pam        #  pam 身份验证


#  设置客户端规则

clientmethod: none


#  用户相关

user.privileged: proxy #  当做一些需要特权的事情时,会使用 proxy 用户的权限(默认有该行)

user.unprivileged: nobody #  正常运行时,使用非特权用户 ID(默认有该行)

#  如果编译时支持 libwrap,使用的用户 ID( libwrap:服务程序安全增强工具,对有状态连接的特定服务进行安全检测并实现访问控制)

user.libwrap: nobody #  默认有该行


#  兼容性相关

compatibility: sameport     #  当客户端连接后,socks 服务器将尝试使用与客户端使用的端口相同(需设置为 root 特权)

compatibility: reuseaddr    #  允许端口复用(加了此行会报错,此处解释仅作参考)


#  启用绑定扩展

extension: bind


#  超时设置

timeout.negotiate: 30   #  设置连接超时时间

timeout.io: 0         #  设置空闲超时时间(0 为永不超时)


#  接受来自地址(DNS)的连接

srchost: nodnsunknown nodnsmismatch


#  设置访问规则

client pass {

        from: 0.0.0.0/0 port 1-65535 to: 0.0.0.0/0

        clientmethod: rfc931 #  匹配密码文件中的所有 ID 用户

}

client pass {

        from: 0.0.0.0/0 port 1-65535 to: 0.0.0.0/0

        log: connect disconnect error #  记录连接、断开、报错信息

}

socks pass {

       from: 10.0.0.0/8 to: 0.0.0.0/0

        protocol: tcp udp

}


#  设置拒绝规则

client block {

        from: 0.0.0.0/0 to: 0.0.0.0/0

        log: connect disconnect error #  记录连接、断开、报错信息

}

socks block {

        from: 0.0.0.0/0 port 1-65535 to: 192.168.1.0/24

        log: connect disconnect error #  记录连接、断开、报错信息

}

socks block { 

        from: 0.0.0.0/0 to: lo0

        log: connect disconnect error #  记录连接、断开、报错信息

}

socks block {         #  阻止任何其他地址连接到 example.com 域

        from: 0.0.0.0/0 to: .example.com port = http

        log: connect disconnect error #  记录连接、断开、报错信息

}


#  添加路由(服务器链接)

route {

 from: 10.0.0.0/8 to: 0.0.0.0/0 port = http via: socks.example.net port = socks

}


配置SOCKS5,我的配置,无账号密码

#  指定日志文件保存的绝对路径

logoutput: /var/log/socks5.log

#  进口 IP 或 网卡

internal: eth0 port = 1080

#  进口网卡及端口

# internal: eth0 port = 9999

#  出口网卡

external: eth0

#  设置代理方式(rfc931)

socksmethod: username || none

#  设置客户端规则

clientmethod: none

#  设置用户权限

user.privileged: root

#  非特权用户

user.notprivileged: nobody

#  如果编译时支持 libwrap,使用的用户 ID( libwrap:服务程序安全增强工具,对有状态连接的特定服务进行安全检测并实现访问控制)

user.libwrap: nobody

#  设置访问规则

client pass {

        from: 0.0.0.0/0 port 1-65535 to: 0.0.0.0/0

        #  记录连接、断开、报错信息

        log: connect disconnect error

}


socks pass {

        from: 0.0.0.0/0 port 1-65535 to: 0.0.0.0/0

        protocol: tcp udp

}



命令

编辑配置文件:sudo vim /etc/danted.conf

停止服务:systemctl stop danted

启动服务:systemctl start danted

重启服务:systemctl restart danted

查看服务状态:systemctl status danted


评论与回复 0

说说你的看法,或者补充文章里没提到的细节。

已开启
a
0 / 1000
评论提交后需要审核,通过后展示。
还没有评论,来说说你的看法吧。